Tecamid

Tecamid™
TECAMID™ Nylon - The industrial standard for machined plastic. High strength and toughness combined with high temperature properties and excellent resistance to grease, oil and solvents.
Features
Grades Available:
- Tecamid™ 6/6 -- standard grade
- Tecamid™ 6/12 -- low moisture absorption
- Tecamid™ ST801
- Tecamid™ 6/6 MDS -- low surface friction, enhanced lubricity
Chemical Resistance
- Aliphatic, Aromatic Hydrocarbons -- excellent (fuels, oils, solvents)
- Organic compounds -- excellent (ketones, esters, aldehydes)
- Partially halogenated hydrocarbons -- good to poor (methylene chloride, chloroform)
Applications
- Gears
- Seals
- Wear plates
- Timing screws
- Washers
- Bushings
- Bearings
OUR PRODUCTS
Tecamid 66 - Extruded Nylon 66
Nylon was the first engineering resin. It has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon has outstanding wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. However, nylon's one weakness is a propensity to absorb moisture and thus have poor dimensional stability.
Tecamid MDS - Molybdenum Disulfide Filled (MDS)
Nylon is one of the most widely used and versatile thermoplastic resins. Its combination of physical properties versus its price makes it a favorite choice for numerous applications. Nylon has a consistent history of replacing other materials including: metal, brass, bronze, aluminum, and rubber. In replacing metal gears in machinery, nylon can be advantageous because of its ability to reduce noise, use less lubrication and increase gear life. TECAMID™MDS is an extruded "moly" filled nylon 6/6, which is gray in color. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity there are many additional property enhancementsthat occur.
Tecamid HS - Heat Stabilized
Nylon was the first engineering resin. It has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon has outstanding wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. However, nylon's one weakness is a propensity to absorb moisture and thus have poor dimensional stability.
Tecamid ST - Super Tough
Nylon was the first engineering resin. It has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon has outstanding wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. However, nylon's one weakness is a propensity to absorb moisture and thus have poor dimensional stability.
Tecamid 612 - Extruded Nylon 612
Nylon was the first engineering resin. It has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon has outstanding wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. However, nylon's one weakness is a propensity to absorb moisture and thus have poor dimensional stability.
Tecamid™ Nylon Sheets and Rods
TECAMID™ is an ideal material for metal replacement in applications whose design requirements include high strength, toughness, and weight reduction.